[. . . ] INSTALLATION INSTRUCTIONS MOBILITY WHEELS (for UK only) Depending on model, your washing machine is provided with mobility wheels. You will find these wheels in the accessory kit supplied with the machine, or you can order them from our After-Sales Service. 1 MOUNTING INSTRUCTIONS 1. Adjust the front feet making sure that the machine is completely level with the floor. Note: Levelling is extremely important to avoid any risk of instability and vibrations. [. . . ] Pour 1/2 litre of water into the detergent drawer to reactivate the Eco system. Select the desired programme and hold down the Start button for about 1 second. 6. WHEN TO DRAIN RESIDUAL WATER • • When transporting (moving) the machine. On next use, pour about 1 litre of water into the detergent drawer to reactivate the Eco system. DRAINING RESIDUAL WATER The residual water drain hose (if provided) is located in the machine plinth. If the machine is not provided with a drain hose in the plinth, remove the filter to drain residual water (see “Removing The Filter”). 85 PROGRAMME SEQUENCE INDICATOR Indicates the programme selected and the current step in the sequence. “Stop”: Programme end. DOOR LOCK / PROGRAMME END DOOR LOCK The door locks automatically after the programme start until the end of the programme. IMPORTANT: During the first 15 minutes of the Cotton and Synthetic programmes (without Prewash) you can open the door to add items to the wash. This is not possible when the special option “Quick Wash” / “Rapid” is selected. If the programme selector is set to “0” or the electrical supply is interrupted, the door lock will open after approximately 2 minutes. PROGRAMME END 1. Note: Do not fully close the door but leave it ajar to allow the drum to dry out. PROGRAMME RESELECTION / INTERRUPTING THE PROGRAMME PROGRAMME RESELECTION a. The new programme will continue fwith the same programme step at which the previous programme was interrupted. CANCELLING THE CURRENT PROGRAMME AND RESTARTING WITH A DIFFERENT ONE There's no need to add more detergent when you start the new programme, since almost no water is drained out when a programme is cancelled. Hold down the Start button for about 5 seconds or until the programme control audibly restarts. Wait until the programme sequence indicator reaches “Stop”. Set the programme selector to the new programme, selecting the new temperature and any special functions required. 84 TO INTERRUPT / PAUSE A PROGRAMME To interrupt a programme that is already running and then restart it later: 1. The programme will continue from where it was interrupted. TO STOP A PROGRAMME BEFORE THE END / DRAINING To stop the programme before it has finished and drain the water: 1. Only open the door when the programme sequence indicator has reached “Stop”. SELECTING SPECIAL OPTIONS (Depending on model, see also the separate programme chart). Prewash button • Only select for washing heavily soiled laundry (sand and grainy dirt). Rinse hold button • The laundry remains in the last rinse water without being spun, to avoid heavy creasing and prevent colours from dranging. • Especially suitable for the “Synthetic” or “Delicate” programmes, if the laundry is not to be unloaded immediately after the end of the programme. • Stopping Rinse Hold : Press the Rinse Hold button again; the load will be spun automatically according to the selected programme. [. . . ] 79 PROTECTING THE ENVIRONMENT • Packing The packaging is marked with the recycling symbol , signifying that it can be 100% recycled. Dispose of the appliance in conformity with environmental regulations. Make it inoperable, pull out the plug and cut off the power cable so that the appliance cannot be connected to the mains. Eco-tips A full load (depending on the programme selected) gives the best energy and water consumption. [. . . ]